#!/usr/bin/env python2
import RPi.GPIO as GPIO
import time

#+----------+-Rev2-+------+--------+------+-------+
#| wiringPi | GPIO | Phys | Name   | Mode | Value |python
#+----------+------+------+--------+------+-------+
#|      0   |  17  |  11  | GPIO 0 | IN   | Low   |32
#|      1   |  18  |  12  | GPIO 1 | IN   | Low   |15
#|      2   |  27  |  13  | GPIO 2 | IN   | Low   |31
#|      3   |  22  |  15  | GPIO 3 | IN   | Low   |--
#|      4   |  23  |  16  | GPIO 4 | IN   | Low   |22
#|      5   |  24  |  18  | GPIO 5 | IN   | Low   |--
#|      6   |  25  |  22  | GPIO 6 | IN   | Low   |--
#|      7   |   4  |   7  | GPIO 7 | IN   | Low   | --
#|      8   |   2  |   3  | SDA    | IN   | Low   |
#|      9   |   3  |   5  | SCL    | IN   | Low   |
#|     10   |   8  |  24  | CE0    | IN   | Low   |
#|     11   |   7  |  26  | CE1    | IN   | Low   |
#|     12   |  10  |  19  | MOSI   | IN   | Low   |
#|     13   |   9  |  21  | MISO   | IN   | Low   |
#|     14   |  11  |  23  | SCLK   | IN   | Low   |
#|     15   |  14  |   8  | TxD    | IN   | Low   |
#|     16   |  15  |  10  | RxD    | IN   | Low   |
#|     17   |  28  |   3  | GPIO 8 | IN   | Low   |3
#|     18   |  29  |   4  | GPIO 9 | IN   | Low   |--
#|     19   |  30  |   5  | GPIO10 | IN   | Low   |5
#|     20   |  31  |   6  | GPIO11 | IN   | Low   |
#+----------+------+------+--------+------+-------+
#phy_led = [8, 10, 12, 16, 18, 22, 24, 26, 32, 36, 38, 40,
#	37, 35, 33, 31, 29, 23, 21, 19, 15, 13, 11, 7, 5, 3];

valid_led = [32,15,31,22,3,5];

print ('Pi Board Information')
print ('---------------------')
#for key,val in GPIO.RPI_INFO.items():
#    print '%s => %s'%(key,val)
#response = raw_input('\nIs this board info correct (y/n) ? ').upper()

#17,18,27,22,23,24,25, 4, 2, 3, 8, 7,10, 9,11,14,15,28,29,30,31
GPIO_23=22
GPIO_17=32
GPIO_18=15
GPIO_27=31
GPIO_23=22
GPIO_2=3
GPIO_3=5


GPIO.setmode(GPIO.BOARD)
#17,18,27,22,23,24,25, 4, 2, 3, 8, 7,10, 9,11,14,15,28,29,30,31
myLED=GPIO_18
while True: 
#for myLED in valid_led:
    print '. on . ',myLED
    GPIO.setup(myLED, GPIO.OUT)
    GPIO.output(myLED,True)
    time.sleep(0.5)
    print '**off**',myLED
    GPIO.output(myLED,False)
    time.sleep(0.5)